ADC Network Card GigE Series User Manual

UniPatch® GigE Series  
Gigabit Ethernet Patch Panel  
ADC has designed a professional broadcast-quality Gigabit (1000 baseT) patching system for  
demanding professional environments where frequent patching and higher density is required. The  
system features a high-density 32-port normal-through card frame system to ADC KRONE® Direct-  
Edge LSA-PLUS® termination system. Now you can patch Ethernet data properly using reliable  
durable military-grade jacks rated for 30,000 insertions/withdrawal cycles. The Cat 6 rated patch  
cords are keyed to ensure proper patching.  
Compared to other systems employing light duty RJ45 connectors rated at fewer than 500  
insertions/withdrawal cycles or bantam jacks that do not switch all signal lines, the UniPatch® GigE  
module is a significant advance in Ethernet and machine control patching.  
The GigE system is a dense pack digital control interface patching system that provides test access,  
patch, cross-connect and monitor functions in 100 Ohm balanced transmission systems. It has  
a common signal format, bit rate, and operation up to Gigabit Ethernet (1,000 Mbits/sec). The  
UniPatch GigE system is the choice for carrier-class Ethernet patching where reliability is critical.  
Features:  
• Category 5e channel compliant  
• High-density modular design, 32 circuits per panel  
• Available with normal-through (patch by exception) or straight-through modules  
• Modular LSA-PLUS® punch down backplane  
• Keyed and highly reliable military-grade patch cords, rated to 30,000 cycles  
• Available with an easily removable wire management bar  
• Cable agnostic (works with any Cat 5e/Cat 6 cable)  
w w w . a d c . c o m  
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0  
1 - 8 0 0 - 3 6 6 - 3 8 9 1  
 
UniPatch® GigE Series  
Specifications  
ELECTRICAL  
Characteristic Impedance:  
Voltage Rating:  
NEXT:  
100 Ohms typical  
500 Volts AC @ 60 Hz with a trip current of 1 milliamp for 1 minute  
Category 5e channel compliant  
FEXT:  
Category 5e channel compliant  
Contact Resistance:  
Insulation Resistance:  
.02 Ohm maximum change post environmental  
5000 Megohms minimum initial  
MECHANICAL  
Mechanical Durability:  
Insertion Force:  
Withdrawal Force:  
30,000 cycles min (front port: dense pack); 50 cycles min (LSA slot)  
7 lbs maximum  
2 lbs minimum  
Patch Cord Cable Bend and Twist: 500 cycles minimum  
Dimensions:  
2 rack unit  
ENVIRONMENTAL  
Thermal Shock:  
Moisture Resistance:  
Corrosion (Salt Spray):  
Flammability:  
-40°C to 65°C operating; -55°C to 85°C non-operating  
0% to 95%; MIL-STD-202 Method 106  
MIL-STD-202 Method 101, Test Condition B  
UL 94-VO rated  
Vibration:  
MIL-STD-202 Method 201  
Solvent Resistance:  
MIL-STD-202 Method 215  
FINISH  
Sheetmetal Panel:  
Plastic Housings:  
Contact Springs:  
PC Board:  
.075 CRS w/ protective black finish  
ABS/PC, deep blue color  
50 microinch gold plating MIL-G-45204 Type 1  
FR-4 with gold plated contacts  
Card Edge Connector:  
LSA-PLUS: Krone 17-position termination block  
w w w . a d c . c o m  
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0  
1 - 8 0 0 - 3 6 6 - 3 8 9 1  
3
 
O rd e r i n g I n f o r m a t i o n  
Description  
Catalog Number  
Gigabit Ethernet patch panel  
32-port GigE normalling patch panel  
32-port GigE non-normalling patch panel  
Gigabit Ethernet jack module  
2-port GigE normalling jack module: PCB with green masking  
2-port GigE non-normalling jack module: PCB with black masking  
Gigabit Ethernet LSA-PLUS backplane module  
Gigabit Ethernet LSA-PLUS 8-circuit backplane module  
Gigabit Ethernet & RS422 Cat 6 patch cords (length)  
1.8 m (6 ft)  
VP2232-GIGE  
VP2232-GIGE-NN  
DM-GIGE  
DM-GIGE-NN  
VPRM-GIGE-LSA  
PC-GIGE-6  
PC-GIGE-4  
PC-GIGE-3  
PC-GIGE-2  
1.2 m (4 ft)  
0.9 m (3 ft)  
0.6 m (2 ft)  
Chassis  
Empty chassis; color: black  
VP2232-BK  
VP2232-G  
Empty chassis; color: gray  
Accessories  
LSA insertion tool and handheld LSA block holder  
Handheld/rack mountable LSA block holder  
Cable bar  
DM-GIGE-TOOL-KIT  
DM-GIGE-TOOL  
ADCCMR-A  
ADCCMR-A  
DM-GIGE-TOOL-KIT  
PC-GIGE-X  
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080  
Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our website.  
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101  
Specifications published here are current as of the date of publication of this document. Because we are continuously  
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may  
verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.  
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features  
contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer  
104538AE 6/07 Original © 2007 ADC Telecommunications, Inc. All Rights Reserved  
 

3Com Switch 3C17500 User Manual
Adaptec Network Card ATA II 1220SA User Manual
Addonics Technologies Computer Hardware AD4SA6GPX2 User Manual
Agilent Technologies Work Light E1401 90493 User Manual
Aiphone Intercom System TB 6H User Manual
Alliance Laundry Systems Washer HF455 User Manual
Alpine Car Video System TMX R705 User Manual
AOC Flat Panel Television L22H998 User Manual
Bacharach Carbon Monoxide Alarm 19 9336 User Manual
BC Speakers Portable Speaker ME75 User Manual