ADC Switch NCX 1000 User Manual

OmniReach® NCX-1000  
Large Cabinet for FTTN Broadband Service Delivery  
The NCX-1000 is a passive fiber-to-the node (FTTN) service delivery cabinet that is easily placed in  
the feeder or distribution plant to support any re-sectionalizing or broadband overbuild application.  
It is typically installed with an adjunct DSLAM cabinet or remote terminal that houses a broadband  
DSLAM. The compact cabinet is designed for FTTN applications where re-sectionalizing the  
network requires either a new cross connect interface with a 1:2 ratio of feeder to distribution  
pairs or for 1:1 ratios where ADCs patented Distribution Intercept (DI) service delivery solution is  
used. The NCX-1000 family of cabinets supports up to 900 feeder circuits and 1800 distribution  
circuits with 432 DSLAM input and output ports in a non-protected FDI configuration. Options for  
non-protected and protected DSLAM circuits utilizing ComProtect® high performance protection  
are available.  
ADCs OmniReach® FTTX Solutions are the industrys first infrastructure solutions designed from  
the ground up to meet the unique requirements of FTTX networks. Designed for operational  
efficiency and scalability, OmniReach solutions simplify FTTX network installation, maintenance and  
management from the central office/headend to the outside plant.  
Features  
Drop down panels offer easy access to OSP cable stubs for splicing into DSLAMs and network  
FDI (1:2) and patented Distribution Intercept (DI) (1:1) configurations available  
Works with existing F1/F2 cross box or can replace it  
Able to groom all existing xDSL shelves into a single format and provide cross-connect capability  
in addition to pair-bonding  
Supports in-cabinet circuit protection  
Meets GR-487 requirements  
w w w . a d c . c o m  
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0  
1 - 8 0 0 - 3 6 6 - 3 8 9 1  
 
OmniReach® NCX-1000  
Large Cabinet for FTTN Broadband Service Delivery  
DLC Remote Cabinet  
Cross Box  
Adjunct DSLAM Cabinet  
Cross Box  
ComProtect  
OmniReach NCX-1000  
Cross connect with Central location for xDSL service delivery  
DSLAM circuit  
protection  
LSA-PLUS IDC for distribution intercept  
“Look both ways” testing  
Integrated cable management  
Specifications  
GENERAL SPECIFICATIONS  
Cabinet Size:  
48" x 21" x 54" (height x depth x width)  
OSP Pairs Termination:  
DSLAM Pairs Termination:  
Configurations:  
710 connectors  
710 connectors  
FDI (1:2) protected  
600 feeder pairs, 1,200 distribution  
pairs, 432 DSLAM in/out ports  
FDI (1:2) non-protected  
900 feeder pairs, 1,350 to 1,800 distribution  
pairs, 432 to 648 DSLAM in/out ports  
1,600 OSP pairs in/out, 864 DSLAM ports in/out  
DI (1:1) non-protected  
MECHANICAL SPECIFICATIONS  
OSP Input/Output:  
LSA-PLUS Series 2 disconnect block (white)  
DSLAM Input/Output:  
Contact Resistance:  
LSA-PLUS Series 2 switching block (brown)  
< 1 m Ω  
Insulation Resistance:  
Contact Material:  
> 5 x 104 MΩ  
Copper Alloy  
Contact Plating:  
Silver  
Number of Test Cord Insertions:  
IDC Reterminations:  
> 750  
> 200  
Cross Connect Wire Requirements:  
24 AWG solid, tinned cross connect wire  
for all terminations  
w w w . a d c . c o m  
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0  
1 - 8 0 0 - 3 6 6 - 3 8 9 1  
3
 
O rd e r i n g I n f o r m a t i o n  
Description  
Catalog Number  
NCX-1000 Cabinets  
NCX-1000 cabinet FDI (1:2) protected configuration equipped with 600  
feeder pairs and 1200 distribution pairs with 864 DSLAM ports in/out protected.  
Includes Insertion Tool and LSA-PLUS Series 2 test cord. Order ComProtect  
protection modules separately.  
KCE-FJA600X1200-2  
NCX-1000 cabinet FDI (1:2) non-protected configuration equipped with  
900 feeder pairs and 1800 distribution pairs with 432 DSLAM ports in/out  
non-protected. Used for applications where adjunct DSLAM cabinet is equipped  
with protection for DSLAM input and output circuits. Includes Insertion Tool and  
LSA-PLUS Series 2 test cord.  
KCE-FJA900X1800-2N  
KCE-FJA900X1350-3N  
NCX-1000 cabinet FDI (1:2) non-protected configuration equipped with  
900 feeder pairs and 1350 distribution pairs with 648 DSLAM ports in/out  
non-protected. Used for applications where adjunct DSLAM cabinet is equipped  
with protection for DSLAM input and output circuits. Includes Insertion Tool and  
LSA-PLUS Series 2 test cord.  
NCX-1000 cabinet DI (1:1) non-protected configuration equipped with 1600  
OSP Intercept pairs in/out and 216 DSLAM ports in/out. Can accommodate  
up to 864 DSLAM ports. Additional block assemblies ordered separately. Used  
for applications where adjunct DSLAM cabinet is equipped with protection for  
DSLAM input and output circuits. Includes Insertion Tool and LSA-PLUS Series 2  
test cord and green activation plugs.  
KCE-DJA1600-1N  
Accessories  
Insertion Tool  
6417 2 055-01  
6647 2 900-01  
6089 3 055-02  
Look-both-ways test cord for Series 2  
LSA-PLUS Series 2 green activation plugs for xDSL activation (for KCE-DJA1600-1N)  
Quantity: 1 (order in multiples of 100)  
Pad Mount Frame for NCX-1000  
ACE-304PMF  
ComProtect solid state overvoltage protection module for applications up to  
6659 1 010-30  
ADSL2+. Two protectors required per circuit. Black housing, package of 100.  
ComProtect gas discharge tube overvoltage protection module  
for applications up to VDSL2. Two protectors required per circuit.  
Quantity: 1 (order in multiples of 100)  
PRO-6659 1 509-30  
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080  
Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our website.  
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101  
Specifications published here are current as of the date of publication of this document. Because we are continuously  
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may  
verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.  
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features  
contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer  
105052AE 6/08 Revision © 2008, 2007 ADC Telecommunications, Inc. All Rights Reserved  
 

2SW LSRC 26925SW LSRC 26923SW LSRC 26940SW LSRC 26940TT User Manual
3Com Switch 4200G User Manual
Acoustic Research Headphones AW722 User Manual
Addonics Technologies Computer Drive AD5EHPMEU3 User Manual
Agri Fab Outdoor Cart 45 0345 062 User Manual
Aiphone Conference Phone TS 12K User Manual
Allied Telesis Network Router AT AR236E User Manual
American Audio DJ Equipment Pro Scratch 1 User Manual
Bakers Pride Oven Convection Oven BCO G2 User Manual
Barco Computer Monitor MIVD 1218 User Manual