Bryan Boilers Water Heater BE 210 WT4T7 User Manual

Form No. 4800  
(Rev. 11/06)  
Bryan Electric  
Indirect Water Heaters  
98,300 to 1,081,100 BTUH  
30 to 330 KW  
Model BE-210-WT4T7  
Note these features:  
Long life indirect heat exchanger and Incoloy  
sheathed electric heating elements  
reactions such as oxidation or precipitation, the principal  
causes of corrosion and scale formation.  
All brass and copper finned-tube, high-efficiency heat  
exchanger transfers heat from hot heater water to service  
water flowing through exchanger. This results in both long  
electric heating element and long heat exchanger life with  
trouble-free operation. Special Incoloy alloy also substan-  
tially contributes to electric element life as compared to  
copper sheathing used in conventional electric heaters.  
Condensation free  
The Bryan indirect heater operates at water temperatures  
that eliminate problems caused by moisture from sur-  
rounding air condensing as water, contributing to rusting  
and wet floors.  
Quality construction  
Structural framework supports primary hot water vessel  
and power panel cabinet. Vessel and frame protected by  
a heavy 16 gauge steel, zinc-coated jacket attractively  
finished with two coats of enamel.  
Economical scale-free boiler operation  
Scale-free operation means higher continuous heat trans-  
fer efficiencies and reduction of maintenance costs. Con-  
ventional electric heaters generally require periodic shut-  
down for descaling of elements. Bryan’s indirect closed  
system heating means little or no scale build-up.  
Applications  
Versatile for all typical commercial and industrial applica-  
tions, such as schools, apartments, hotels and motels,  
laundries, restaurants, hospitals, factories, etc. The heater  
may be used in conjunction with a storage tank (the tank  
and accessories may be supplied by Bryan as a packaged  
“Water-Pak”) or if the application permits, may be applied  
as a “tankless” installation. Available alternative to fossil  
fuel units when strict emission requirements must be met.  
Corrosion-resistant operation  
Corrosive and scale forming service water does not come  
into direct contact with steel heater parts and electric  
heating elements. Service water being heated circulates  
only through the copper indirect heat exchanger within a  
temperature range that eliminates or minimizes chemical  
®
BRYAN BOILERS  
 

Belkin Speaker 157 User Manual
Bernard Welder Q15013 User Manual
Black Decker Cordless Drill BDCDHP220 User Manual
Blaupunkt Car Video System IVSC 5501 User Manual
Bogen Car Amplifier RPK87 User Manual
Bolens Lawn Mower 130 400 300 User Manual
Bose Speaker System 336 User Manual
Bose Stereo System 25 Series II User Manual
Brocade Communications Systems Switch 24000 User Manual
Chicago Electric Impact Driver 67845 User Manual